FIT SHIV V3 FORK 25MM

Details

Our goal was to design and produce an extremely strong fork with plenty of tire clearance. After 2 years of R&D and a lot of investment in tooling, the Shiv V.3 is available with a quick 25mm offset. Here are a few features that make these forks so strong.

• Using left and right specific investment cast drop-outs instead of traditional Cr-Mo plate, weve eliminated the weld gap on the inside of the drops, and were able to thicken up the drops toward the top making a much stronger drop-out/leg connection.
• Seamless, swaged legs provide more strength than welded or fused caps-especially if pegs are installed. The ends of these legs are formed, not capped and welded so there is nothing to fracture.
• A longer 166mm CNCd steerer tube with increased wall thicknesses wherever possible and a 24mm x 1.5 compression cap with integrated race.
• Tapered and butted legs provide tons of strength, crown weld surface, and peg clearance./li>
• Post weld 4Q Baked heat-treatment

SPECS >

• Legs:Seamless Swaged (No Welded Cap)
• Dropouts: Investment Cast
• Steerer Tube: 1 Piece CNC-Machined 4130 CrMo
• Steerer Tube Length: 166mm
• Compression: M24 X 1.5 Thread 6mm Allen Slot
• Axle to Crown: 320mm
• Offset: 25mm
• Weight: 2.25 lb (1.02 kg)
• Heat Treat:4Q Baked Post-Weld